Technology Hub
The LiDAR, InSAR, GIS and geophysical tools behind every Geotechnica report, and the data each one gives you.
Explore by where we look
Four Ways We Read the Ground
Every site is different, so no single method fits every job. We combine tools from the air, below the surface, on the water and in the data.
Start with your question
Which Technology Do You Need?
Know what you'll get before you commit budget. Find your question, then see the method and the output.
| Your question | Technology | What you get |
|---|---|---|
| Is this slope or right-of-way moving? | LiDAR + Change Detection Mapping | Maps of terrain change between survey dates |
| What is under the forest canopy? | Airborne LiDAR or LiDAR Drone | Bare-earth DTM, contours and slope gradient |
| How deep is bedrock? Are there cavities? | Electrical Resistivity, Seismic Refraction, MASW | 2D/3D subsurface sections and depth to rock |
| Where is the ground soft along my pipeline? | Sentinel-1 InSAR, IFSAR, satellite imagery | High, medium and low risk zones along the route |
| Where would a debris flow go? | LiDAR terrain metrics + GIS modelling | Source zones, pathways and hazard maps |
| What does the river or lake bed look like? | USV bathymetry + UAV | Merged above- and below-water 3D model |
| Is the shoreline retreating? | DSAS shoreline analysis | Shoreline change rates over time |
From the air
Aerial & Remote Sensing
Cover large, steep or forested areas quickly, without putting a crew on every slope.
Airborne LiDAR
Laser scanning from an aircraft for large, forested or hilly areas where ground survey is slow.
Used for: 170 km² LiDAR survey of Gunung Jerai, Kedah for JMG (2025).
LiDAR Drone (UAV)
Drone-mounted LiDAR for slopes, corridors and sites too steep or overgrown to walk safely.
Used for: site-scale slope and corridor surveys.
Aerial Photogrammetry
Overlapping drone photographs processed into measured 3D models of the ground.
Used for: engineering geological mapping at Pulau Redang for JKR Terengganu (2022).
Satellite & InSAR
Sentinel-1 radar, IFSAR terrain models and satellite imagery to screen long routes from the desk.
Used for: compressible ground screening along the PGB gas pipeline (2026).
Change Detection Mapping
Compares terrain data captured on different dates to flag where the ground has moved.
Used for: CDM and LSM along the 512 km Sabah–Sarawak Gas Pipeline (2023).
Topographical Survey
Ground survey to tie aerial data to real control points and site features.
Used for: supporting LiDAR and photogrammetry deliverables.
Below the surface
Geophysical Survey
Non-destructive methods that show what lies beneath, between and beyond your boreholes.
Electrical Resistivity
Measures how easily current passes through the ground to map what lies beneath it.
Used for: subsurface investigation and groundwater studies.
Seismic Refraction & MASW
Uses seismic waves to profile soil stiffness, layer boundaries and depth to rock.
Used for: seismic refraction at Genting Highlands for Xintiandi Development (2022).
GPR, Gravity & Magnetic
Ground penetrating radar for shallow features; gravity and magnetic surveys for wider geological structure.
Used for: extending borehole data across a wider area.
On the water and in the data
Hydrographic, Coastal & GIS Modelling
Map river beds, basins and coastlines, then turn raw terrain and field data into hazard maps your engineers can act on.
Bathymetry via USV
An uncrewed surface vessel maps river and lake beds, then merges with drone data into one 3D model.
Used for: flood and landslide assessment for PETRONAS Gas Berhad (2022), with USV and UAV.
River Network & Basin Mapping
Maps rivers, watersheds and flood zones to support river basin planning.
Used for: updating Sarawak river network data for JPS under IRBM Phase 2 (2026).
DSAS Shoreline Analysis
Digital Shoreline Analysis System measures how a coastline has shifted over the years.
Used for: long-term coastal planning.
GIS Hazard Modelling
Builds landslide, flood and groundwater models from terrain, geology and rainfall layers.
Used for: slope hazard and risk mapping for JMG and JKR.
Debris Flow Modelling
LiDAR-derived terrain metrics to find debris source zones, pathways and run-out areas.
Used for: debris flow hazard work at Gunung Berembun, Negeri Sembilan (2025).
Geological Mapping Data
Field mapping turned into digital geological maps for design and hazard work.
Used for: terrain and engineering geological mapping nationwide.
How it works
From Raw Data to a Signed Report
Data is only useful once a professional has read it. Every project follows the same four steps.
1
Scope
We match the method to your question, site and budget before anything is flown or measured.
2
Acquire
Field crews, drones, aircraft, vessels and geophysical equipment collect the raw data.
3
Process
In-house processing: calibration, point cloud classification, feature extraction and GIS layers.
4
Interpret & Sign
Geologists and geospatialists interpret the data. Reports are signed by a Professional Geologist (P.Geol.) or Engineer (Ir.).
Technology in the field
Projects Built on This Technology
Recent work where LiDAR, satellite data and GIS made the difference.
- JMG Kedah · 2025
LiDAR Survey of Gunung Jerai, 170 km²
High-resolution airborne LiDAR across 170 km² of Gunung Jerai for terrain and hazard analysis.
- PETRONAS Gas Berhad · 2026
Remote Sensing for the PGB Gas Pipeline
Satellite imagery, IFSAR and Sentinel-1 data used to zone compressible ground along the pipeline right-of-way.
- PETRONAS Carigali · 2023
CDM & LSM for the 512 km SSGP
Ground change detection and landslide susceptibility mapping along the Sabah–Sarawak Gas Pipeline.
Frequently Asked Questions
LiDAR sends laser pulses that pass through gaps in vegetation, so it can map the bare ground under forest. Photogrammetry builds the model from photographs, so it works best on open ground and is usually the lower-cost option for orthophotos and volumes.
Drone LiDAR suits single sites, slopes and short corridors. Airborne LiDAR suits large areas, such as our 170 km² survey of Gunung Jerai for JMG.
No. Geophysics extends borehole data across a wider area, so you can place boreholes where they matter most and reduce the overall cost of site investigation.
It depends on the method. Typical outputs include DSM, DTM, orthophotos, classified point clouds, hillshade, slope, contour and flow accumulation layers, together with an interpreted report.
Yes. Change Detection Mapping compares LiDAR or satellite data from different dates to show where the ground has changed.
Yes. Our work includes the 512 km Sabah–Sarawak Gas Pipeline and river network mapping across Sarawak.
Start with the question you need answered, such as slope movement, depth to bedrock or soft ground along a route. Our team will recommend the method, or a combination of methods, that fits your site and budget.
Reports are interpreted by our geologists and geospatialists and signed by a Professional Geologist (P.Geol.) or, where engineering input is needed, a Professional Engineer (Ir.).